Retro Engagement Rings - Estate Diamond Jewelry https://www.estatediamondjewelry.com/product-category/retro-engagement-rings/ Vintage Engagement Rings and Antique Engagement Rings Tue, 13 Jun 2023 13:43:56 +0000 en-US hourly 1 https://wordpress.org/?v=6.2.2 Belmont Ring. Circa 1945 (Vintage, Retro Era) https://www.estatediamondjewelry.com/product/belmont-ring/ Sun, 04 Jun 2023 15:06:26 +0000 https://www.estatediamondjewelry.com/?post_type=product&p=30177 This French Retro era ring features a old European cut diamond weighing approximately 0.45 carats, H color, VS2 clarity. The center diamond is set in prongs inside a square bezel. additional 24 single cuts diamond and two baguette cut diamonds. This ring is French, and was handcrafted in platinum circa 1945.

The total approximate diamond weight is 0.75 carats.

The approximate measurements of the diamond including the additional diamonds are 11.50mm x 16.87mm.

This ring can be resized to any finger size at no extra cost.

If you have any questions about the Belmont ring, please feel free to contact us.

https://youtu.be/sPIfCqbwgpQ

The post Belmont Ring. Circa 1945 (Vintage, Retro Era) appeared first on Estate Diamond Jewelry.

]]> Dalton Ring. Circa 1940 (Vintage, Retro Era) https://www.estatediamondjewelry.com/product/dalton-ring/ Sun, 14 May 2023 18:20:03 +0000 https://www.estatediamondjewelry.com/?post_type=product&p=23294 A geometric emerald and diamond ring from the Retro era. The emeralds are calibre cut and channel-set. A row of transitional cut diamonds is set above and below the row of emeralds. The total diamond weight of this ring is approximately 0.57 carats. The total emerald weight of this ring is approximately 0.36 carats. This vintage ring was handcrafted in platinum circa 1940.

The width of this ring at its widest point is approximately 12.45mm.

If you have any questions about the Dalton ring, please feel free to contact us.

https://youtu.be/5BiCY61nUx8

 

The post Dalton Ring. Circa 1940 (Vintage, Retro Era) appeared first on Estate Diamond Jewelry.

]]> Andover Ring. Circa 1940 (Vintage, Retro Era) https://www.estatediamondjewelry.com/product/andover-ring/ Mon, 08 May 2023 21:15:37 +0000 https://www.estatediamondjewelry.com/?post_type=product&p=35086 A vintage Retro era ring featuring a 1.93 carat old European cut diamond, K color and VS1 clarity. The diamond is set in prongs inside an octagonal bezel. The mounting is 14k white on yellow gold, decorated with intricate hand-engravings. This ring was handcrafted circa 1940.

The approximate measurements of the diamond are approximately 7.85mm x 7.97mm x 4.74mm.

This ring can be resized to any finger size at no extra cost.

If you have any questions about the Andover ring, please feel free to contact us.

 

The post Andover Ring. Circa 1940 (Vintage, Retro Era) appeared first on Estate Diamond Jewelry.

]]> Palmetto Ring. Circa 1940 (Vintage, Retro Era) https://www.estatediamondjewelry.com/product/palmetto-ring/ Mon, 08 May 2023 14:55:44 +0000 https://www.estatediamondjewelry.com/?post_type=product&p=33806 This one-of-a-kind vintage ring features a transitional cut diamond weighing approximately 0.35 carats, I color and VS2 clarity. The center stone is set in prongs inside of a square bezel. Pave-set old European cut diamonds are set above and below the center diamond. This ring is geometric with stepped shoulders. The mounting is dome-shaped and handcrafted in platinum. This ring is from the Retro era, circa 1940.

The measurements of this ring are approximately 16.72mm x 17.14mm.

This ring can be resized at no additional cost.

If you have any questions about the Palmetto ring, please feel free to contact us.

https://youtu.be/Vt8IHDjVY-8

The post Palmetto Ring. Circa 1940 (Vintage, Retro Era) appeared first on Estate Diamond Jewelry.

]]> Califon Ring. Circa 1945 (Vintage, Retro Era) https://www.estatediamondjewelry.com/product/califon-ring/ Wed, 03 May 2023 15:38:30 +0000 https://www.estatediamondjewelry.com/?post_type=product&p=21782 This ring features an old mine cut diamond weighing 0.40 carats and set in box prongs. The center diamond is H color and VS1 clarity. Each shoulder is adorned with a single cut diamond. This ring is vintage and was handcrafted in 14k white gold during the Retro era, circa 1940.

The measurements of the center diamond are approximately 5.28mm x 5.13mm x 3.63mm.

This ring can be resized to any finger size at no extra cost.

If you have any questions about the Califon ring, please feel free to contact us.

https://youtu.be/wJJLX1nMrPk

The post Califon Ring. Circa 1945 (Vintage, Retro Era) appeared first on Estate Diamond Jewelry.

]]> Debonair Ring. Circa 1940 (Vintage, Retro Era) https://www.estatediamondjewelry.com/product/rare-deco-engagement-ring/ Sun, 30 Apr 2023 23:38:26 +0000 https://www.estatediamondjewelry.com/?post_type=product&p=7223 A vintage French engagement ring featuring a 3.65 carat old European cut diamond, J color and VS1 clarity, set in prongs. Baguette cut diamonds are set on the shoulders flanking the center stone. The total weight of the baguette cut diamonds is approximately 0.10 carats. This ring was handcrafted in platinum during the Retro era, circa 1940.

The measurements of the center diamond are approximately 9.95mm x 10.02mm x 5.79mm.

This ring can be resized to any finger size at no extra cost.

If you have any questions about the Debonair ring, please feel free to contact us.

https://youtu.be/Ye4o35YMdD8

 

The post Debonair Ring. Circa 1940 (Vintage, Retro Era) appeared first on Estate Diamond Jewelry.

]]> Woodhaven Ring. Circa 1940 (Vintage, Retro Era) https://www.estatediamondjewelry.com/product/french-emerald-retro-ring/ Wed, 11 Jan 2023 23:14:00 +0000 https://www.estatediamondjewelry.com/?post_type=product&p=4875 A vintage French emerald ring featuring a 2.01 carat round cut natural emerald, set in prongs inside a square bezel. The mounting is 18k white gold, with geometric cut-outs on the shoulders. This ring was handcrafted during the Retro era, circa 1940, and bears French hallmarks.

The measurements of the emerald are approximately 8.45mm x 8.50mm x 5.11mm. The measurements of this ring are approximately 14.37mm x 14.45mm.

This ring can be resized at no extra cost.

If you have any questions about the Woodhaven ring, please feel free to contact us.

https://youtu.be/QF2mYdfkszM

 

The post Woodhaven Ring. Circa 1940 (Vintage, Retro Era) appeared first on Estate Diamond Jewelry.

]]> Caledonia Ring. Circa 1940 (Vintage, Retro Era) https://www.estatediamondjewelry.com/product/caledonia-ring/ Wed, 11 Jan 2023 22:45:38 +0000 https://www.estatediamondjewelry.com/?post_type=product&p=28871 A vintage Retro era ring featuring an emerald-cut aquamarine set in prongs, with a weight of approximately 4.00 carats. The aquamarine is flanked by two rows of single cut diamonds set in rectangular bezels on the shoulders. Fine milgrain adorns the edges of the bezels. The total weight of the diamonds is approximately 0.18 carats. Rolled bars decorate the north and south edges of the mounting. This vintage ring was handcrafted in platinum circa 1940.

The dimensions of the aquamarine are approximately 12.08mm x 10.27mm x 7.12mm.

This ring can be resized to any finger size at no extra cost.

If you have any questions about the Caledonia ring, please feel free to contact us.

https://youtu.be/8cbqpTcyQ00

The post Caledonia Ring. Circa 1940 (Vintage, Retro Era) appeared first on Estate Diamond Jewelry.

]]> Emerson Ring. Circa 1945 (Vintage, Retro Era) https://www.estatediamondjewelry.com/product/rare-vintage-retro-engagement-ring/ Tue, 03 Jan 2023 23:09:59 +0000 https://www.estatediamondjewelry.com/?post_type=product&p=3644 This impressive ring centers a 3.15 carat old European cut diamond, K color and VS1 clarity, set in prongs. The center diamond is flanked by a row of channel-set baguette cut diamonds on either side. The total weight of the additional diamonds is approximately 1.00 carat. The geometric mounting is handcrafted in platinum and bears French hallmarks. This vintage French ring was made during the Retro Era, circa 1945.

The measurements of the center stone are approximately 9.36mm x 9.32mm x 5.56mm.

This ring can be resized at no extra cost.

If you have any questions about the Emerson ring, please feel free to contact us.

https://youtu.be/YXBitIutLjY

The post Emerson Ring. Circa 1945 (Vintage, Retro Era) appeared first on Estate Diamond Jewelry.

]]> Metcalf Ring. Circa 1945 (Vintage, Retro Era) https://www.estatediamondjewelry.com/product/metcalf-ring/ Mon, 03 Oct 2022 20:48:02 +0000 https://www.estatediamondjewelry.com/?post_type=product&p=41444 A vintage asymmetrical ring, handcrafted in platinum with a mix of round brilliant and single cut diamonds pave-set along the surface. The mounting consists of two sections, one raised above the other. The total diamond weight of this ring is approximately 1.11 carats. This ring was handcrafted during the Retro era, circa 1945.

The height of this ring ranges from approximately 11.35mm - 14.45mm, and the width is approximately 19.64mm.

This ring is size 5.25 and can be resized.

If you have any questions about the Metcalf ring, please feel free to contact us.

https://youtu.be/rvW_vdGGxeY

The post Metcalf Ring. Circa 1945 (Vintage, Retro Era) appeared first on Estate Diamond Jewelry.

]]>